Joyetech eVic VTwo 80W & Cubis Pro Full Kit
Joyetech Cubis Pro Tank perfectly fits the new eVic VTwo Mod, applying upgradeable firmware and dual battery protection. Thus it supports Custom Logo and RTC (Real Time Clock) display with clock screen protection. E-juice filling can be easily achieved by simply removing the top cap and injecting into the side holes. The innovative Cubis Pro with leak resistant cup design allows you to enjoy the best vaping experience ever.
1 * eVic VTwo 80W Mod
1 * Cubis Pro Tank
1 * QCS Coil
1 * NotchCoil 0.25Ω DL Coil
1 * BF SS316 0.5Ω DL Coil
1 * LVC Clapton 1.5Ω Coil
1 * Mouthpiece
1 * eVic VT Skin
1 * USB Cable
1 * Manual and Warranty Card
1 * Warning Card
eVic VTwo 80W Mod
Dimensions: 47 x 25.5 x 85.6mm
RTC / VW / VT (Ni, Ti, SS316) / BYPASS / TCR (M1,M2,M3)
Temperature Range: 100 – 315°C/ 200 – 600˚F
Output Wattage: 1 – 80W
Resistance Range: 0.05 – 1.0Ω for VT Mode
Resistance Range: 0.15 – 3.5Ω for VW & BYPASS Modes
Colors: Black | White | Red | Blue | Orange
Cubis Pro Tank
22mm in Diameter
4mL E-Liquid Capacity
Top Fill Design
Innovative Cup Design
Top Adjustable Airflow Valve
New LVC and QCS Cubis Coils
Compatible with the original Cubis Coils
Removable Insulated Drip Tip
Fully Detachable and Washable
Newly Added QCS Head and LVC Head
New QCS (Quick Change System) coil enables to change the cotton easily.
New Cubis LVC (Liquid Valve Control) Clapton 1.5Ω coil applies the liquid valve control system.
Simply rotate the ring on the base to adjust the valve.
Joyetech eVic VTwo 80W & Cubis Pro Full Kit
Based on the Cubis TFTA-Tank (top filling and top airflow tank) technology, we made a slight modification to the tank.
Simply uninstall the top cap from the airflow ring, then inject the e-juice into the two side holes (not the vent pipe) directly.
Detachable and Washable Structure.
With its special structure, Cubis Pro Tank can be easily detached and is able to wash separately.
Dual Circuit Protection
eVic VTwo applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.
RTC (Real Time Clock) Applied
We applied the latest RTC – Real Time Clock function on eVic VTwo, which presents you the time in two ways.
Users can upload custom logos onto your eVic VTwo provided that the logo is single color bmp. picture with limited 64*40 pixel.
Innovative Leak Resistant Cup Design
The completely leak resistant cup-style tank reservoir allows the top section and coil to be removed and as one solid unit.
Coil replacement and juice fill can be achieved by removing the top section from the cup.
NotchCoil 0.25Ω DL Coil
We kindly recommend the new NotchCoil 0.25Ω DL (Direct Lung) coil which lasts longer and can be used under high wattage condition. It will surely bring you great vaping experience ever.
eVic VTwo comes with upgradeable firmware.
Having Version 4.02 for eVic VTwo, new interface, multiple modes and functions are available.
How to Reset
Should you get stuck while upgrading, just turn the knob to right and then insert into the reset hole with a needle to restart.
Charging & Upgrading
The micro USB port is on the top of the right side. Simply charge eVic VTwo Mini by connecting it with the wall adapter or a computer via USB cable. The battery is charged as shown in the picture. When it is fully charged, the charging bar will disappear.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Vapor Fiend will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by Vapor Fiend and any and all of Vapor Fiend parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Vapor Fiend and any and all of Vapor Fiend parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). Vapor Fiend and any and all of Vapor Fiend parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.