*Standard load:1Ω, Resistance can be normal working: 0.06-5Ω
*Wattage can be adjusted from 7W to 60W, 0.1/click
*Temperature control setting:200-600F(AKA100-300C)
*Nickel Wire Purity Setting: adjust from 1 to 100. The higher purity the wire is, the more should adjust.
*180 degrees Screen Orientation turn over function
*Screen display Output Power,Coil Resistance,Output Temperature/Voltage and Battery Capacity
*Adjustable copper pin
*Working with one 18650 battery (Battery sold separately)
*Battery life protect: Low voltage warning function
*With Short Circuit Protect and Low Resistance Protect Function
*Chip protect:High Temperature Alarm Function
*Kit weight: 310 g
1pc Zero mod
1pc USB charger
1pc Gift box
1.Lock/Unlock mode: Press the main button 5 times, the mod will be locked,5 clicks again to unlock.
2.180 degrees Screen Orientation Mode: After entering locking mode, press MAIN & DOWN at the same time over 3 seconds, the screen will turn over 180 degrees.
3.Stealth mode: After entering locking mode, press MAIN & UP at the same time over 3 seconds, the screen will enter Stealth Mode.
4.Temperature setting: After entering locking mode, press UP & DOWN at the same time over 3 seconds, enter temperature setting mode.
5.Nickel Wire Purity Setting: After entering locking mode, press the MAIN, UP & DOWN at the same time over 3 seconds, enter setting the Nickel Wire Purity mode.
Advanced User Item. Use at Your Own Risk!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Vapor Fiend will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by Vapor Fiend and any and all of Vapor Fiend parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Vapor Fiend and any and all of Vapor Fiend parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). Vapor Fiend and any and all of Vapor Fiend parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.